6 Ways to Build a Leak-Free Roof

Leaking roofs often become a problem that most people subscribe to during the rainy season, especially since the weather conditions in 2017 are different from previous years. The causes of roof leaks also vary.
For example, the roof is leaking not only because there are holes. It could also be due to the less steep slope of the roof, poor installation of tiles, gutter problems, gaps in the roof ridge, or trash on the roof.
Don’t let this problem add to your stress. The solution, build a good roof. Increase the life expectancy of your roof.
Pay attention to the slope of the roof
The slope of the roof should not be too sloping, the limit is 25 degrees – 40 degrees. The appropriate slope of the roof will be able to ward off rainwater that is blown by strong winds, thereby minimizing leaks and seepage walls.
Slopes of more than 40 degrees have the potential to make the roof slide. If the roof design requires a steep steepness of more than 40 degrees, the tiles must be nailed, or use a type of shingle roof that does not fall off easily.
Use Roof Coating
Use plastic or aluminum foil roofing under the tiles. This can help water entering the roof gap to flow toward the gutter. Usually, this is done after the roof has broken.
Check the Roof Frame Routine
Make sure the roof frame is in good condition. Perform routine checks on the ceiling. If you find wood that has started to rot, you should immediately replace it with new wood.
Weathered wood can cause tile to fall and leak. Damaged roof trusses also endanger the safety of homeowners, especially if it rains continuously.
Pay attention to the roof ridges
The roof ridge should not be made too high because it will be prone to cracks. You have to regularly check this section, especially during the rainy season.
Small cracks such as 1cm can be a source of roof leaks. If there are cracks, repair them immediately and patch them with a waterproof coating material, the best material is one that consists of 2 components, namely based on acrylic and based on cement, additives, and fillers. This material is very suitable for use on surfaces that are often submerged in water. If the crack is large, replace it with a new one immediately.
Roof Gutter
Choose the size and shape of the gutter that suits the flow and the amount of water. Minimize joints in gutters which can increase the potential for damage and leaks.
Use the services of an experienced chamfer. Clean the gutters regularly so that no trash builds up that can obstruct the drains.
Cover the roof of the concrete
Make sure the entire surface of the concrete is not covered with the water block. Also, pay attention to the degree of slope, make sure the slope is pointing to the existing gutter.